Follow us :

  • We could provide wooden boxes for packaing. It normally suitable to the short tube delivery and good for protection.

  • Vinmay established a strict quality inspection system and scientific examination standards. All of our tubes are produce strictly according ASTM A554 / EN10296-2 Standard.Before the production, we will have the checked the quality of the raw material. The chemical component of the raw material will be inspected by the professional assay offices. And the thickness and surface of the raw material wi...

  • After high standard requirements on polishing process,we can meet the requirements of electroplating,fine polishing and other application as the result of good smoothness and brightness of our tubes without any pitting,sand hole. As for the mirror polish Square/Rectangular tube , we will polish it as least four times. And the round tubes we polished at least two times.Nowadays, in our new factory,...

  • All of our tubes are welded by Tig welding method, follow the introduction of it.Tungsten inert gas (TIG) welding is an arc welding process that uses a non-consumable tungsten electrode to produce the weld. The weld area is protected from atmospheric contamination by an inertshielding (argon or helium), and a filler metal is normally used, though some welds, known as autogenous welds, do not r...

  • All of the raw materials of Vinmay are from high quality suppliers such asBAOSTEEL,TISCO,TSINGSHAN,ad so on,so shat we can make sure the stability and rust corrosion resistance of ou products. They will go through the strictly inspection including machenical propertity, chemical position and so on. We can provide the formal MTC report together with our goods.

  • Our 600 grit stainless steel tube for square and round tube

  • Steel crate package, which suit to the tubes need to be protected well.

  • We usually use wooden packaging for tubes in short lengths.

  • If treated or stored incorrectly, any grade of stainless steel may discolor or stain. To maintain optimum appearance, the surface should be cared for regularly.The quality of installation affects the durability and lifespan of stainless steel. Therefore, it is important to make sure stainless steel is in good condition before installation. Normally, giving it a quick clean is enough prior to insta...

  • Stainless steel is 100% recyclable . An average stainless steel object is composed of about 60% recycled material of which approximately 40% originates from end-of-life products and about 60% comes from manufacturing processes. According to the International Resource Panel's Metal Stocks in Society report. , the per capita stock of stainless steel in use in society is 80–180 kg in more developed c...

  • Brushed or dull polished metal is metal with a unidirectional satinfinish. It is produced by polishing the metal with a 120–180 grit belt or wheel then softening with an 80–120 grit greaseless compound or a medium non-woven abrasive belt or pad.Commonly brushed metals include stainless steel , aluminium and nickel. Brushed finishes are popular in both small appliances and whiteware, and feature i...

  • Mill finish refers to the surface textures (or finish) of metal after it exits a rolling mill , extrusiondie, or drawing processes, including sheet, bar, plate, or structural shapes. This texture is usually rough and lacks lustre; it may have spots of oxidation or contamination with mill oil. Most mill finish surfaces are machined or treated with polishing, industrial etching, or some other surf...

  • Stainless steel differs from carbon steel by the amount of chromium present. Unprotected carbon steel rusts readily when exposed to air and moisture. This iron oxide film (the rust) is active and accelerates corrosion by making it easier for more iron oxide to form. Since iron oxide has lower density than steel, the film expands and tends to flake and fall away. In comparison, stainless s...

  • In metallurgy, stainless steel, also known as inox steel or inox from French inoxydable (inoxidizable), is a steel alloy with a minimum of 10.5% chromium content by mass.Stainless steel is notable for its corrosion resistance, and it is widely used for food handling and cutlery among many other applications.Stainless steel is used for corrosion-resistant tools such as this nutcracker.Stainless s...

  • The application of stainless steel tubes are divided into civil use and industrial use. The industrial stainless steel is widely use, including petroleum, chemical, natural gas and electrical equipment manufacturing industry. Its main features are strong acid and alkali corrosion resistance, heat resistance, low temperature intensities and mechanical properties, stamping, bending which are good at...

  • According to the production processes, stainless steel tubes divided into seamless tubes and welded tubes. The raw material of seamless steel tube is the round bar billets. Its production techniques are hot rolling and cold drawing.Production processes of hot rolling seamless stainless steel tube : round bar billets →heating→punch the hole→three roll cold cross rolling, rolling in succession and e...

  • FineryDuring the refining process, the oxygen andintert gases (argon and nitrogen) will be blown into the liquid steel to makean effect of false vacuum. Therefore, it can decrease the content of carbon andresist the chromium from oxidized. As for the stainless steel material whichproduced by this way, the quality will be relatively high and good in extension.Intermediate frequency furnace 1.The ca...

  • Hot rolling is above the recrystallization temperature of rolling; Cold rolling is below the recrystallization temperature of rolling, both are based on the hot strip rolling.And then recover its mechanical properties by annealing . It generally underprocess such as hot rolling,acid pickling, cold rolling and annealing. There is no oxide coating during cold rolling process. Inthis way, the surface...

  • AISI 304(American Standard) is also named EN 1.4301( Europe Norm), which has capacity of high corrosion resistance, mechanic property and surface processing. It mainly contains Cr 18%, Ni 8%~10%, C≤0.08%,Mn 2%, Si 1%, P 0.045%, S 0.03%. Chemical element of stainless steel efficiently impacts the performance of corrosion resistance and working time. Lower Cr% and Ni% or higher C% directly affect t...

  • 304 stainless steel is used for a variety of household and industrial applications such as screws, machinery parts, car headers, and food-handling equipment. # 304 stainless steel is also used in the architectural field for exterior accents such as water and fire features.

  • 304 stainless steel, also known as stainless steel (18/8 stainless steel,) European norm 1.4301, is the most common stainless steel. The steel contains both chromium (usually 18%) and nickel (usually 8%) metals as the main noniron constituents.It is an austenite steel. It is not very electrically or thermally conductive and isnon-magnetic. It has a higher corrosion resisitance than regualr...

  • Surface very smooth, without pitting and hole, very shineAfter high standard requirements on polishing process, we can meet the requirements of electroplating, fine polishing and other application as the result of good smoothness and brightness of our tubes without any pitting, and hole. Surface with pitting, sand hole, peeling.Some tubes made by recycled material are usually have surface issues l...

  • We are locate in Foshan City which is a famous stainless steel production base. Our new workshop is located in Sanshui District, Foshan City.

  • Vinmay produce more than 25000 tons stainless steel tubes in a year.

  • 95% of our tubes export. We mainly sell to Europe and Latin America. We sell to the countries like Russia,Poland, Lithuania, UK,Columbia,Canada,etc..

  • The Quality inspectors inspect the tubes during each production processes from raw material,tube welding,polishing,packaging.1,Before the production of each machine, we will have the first checked and record the data.2, During the production, our inspector and engineer have been carefully moniting and we record the data every two hours.

  • After high standard requirements on polishing process,we can meet the requirements of electroplating,fine polishing and other application as the result of good smoothness and brightness of our tubes without any pitting,sand hole.1)As for the mirror polish square/rectangular tube , we will polish it as least four times)2)During the polishing processing, we set a special sanding wheel to polish the ...

  • All of our tubes are welded by tig welding methods. Our tubes can get fully welding and smooth inner welding,without blisters, leak welding or black line. All of our tubes are good for tube bending.

  • Our diameter and thickness tolerance are strictly controlled according to ASTM A554 standard.The tube with OD range 10mm to 25.4mm, we have the ability to control the Tolerance within +0-05mm~0.08mm

  • We never use recycled material to make tubes, only the first class material. All of the raw materials of Vinmay are from high quality suppliers such as BAOSTEEL,TISCO,TSINGSHAN,ad so on,so that we can make sure the stability and rust corrosion resistance of our products. The thickness tolerance of coil could be controlled within +/-0.02-0.03mm. All the raw material of Vinmay will go through the s...

  • ASTM A249 SS tubes are intended for uses such as: superheater, heat exchanger, condenser tubes. ASTM A269 SS tubes are used in boiler in petroleum, paper making and mining industry.ASTM A270 SS tubes are used in sanitary ware in food industry.

  • Tubes for Automobile : Mainly for exhaust pipe and bumper. Regular materials are 304, 409L and 410.Tubes for handrail: Mainly for railing system, handles. Regular materials are 201, 202, 304 and 316L.Tubes for machinery equipment: Mainly for automation equipment. Regular materials are 201 and 304.Tubes for sanitary wares: Mainly for SS hand shower , SS faucet, SS shower room, SS bathroo...

  • We could provide flexible payment term payment term : T/T, LC, Cash

  • One container quantity tubes can be ready in our factory in 35-45 days after receiving the buyer's deposit or original of LC.

  • Our packing can be adjusted according to the customer’s actual situation and requirements, we have different packing materials like hollow sheets, weaving bags, steel crates, wooden boxes. The packing look nice, and also very convenient for customers to load or unload goods.

  • MaterialC(%)Si (%)Mn(%)P(%)S(%)Cr(%)Ni (%)201≤.0.15≤.1.00≤.8.5-10.0≤.0.06≤.0.0314.0-16.00.8-1.2304≤.0.08≤1.00≤2.00≤.0.045≤.0.03018.0-20.08.0-10.0316L≤.0.03≤.1.00≤2.00≤.0.045≤.0.03016.0-18.010.0-14.0409L≤.0.03≤.1.00≤1.00≤.0.040≤.0.0310.5-11.750.6430≤.0.12≤.1.00≤.1.00≤.0.040≤.0.030≤.16.0-18.00.75